Tutoring jobs
1st lesson free!
Verified teacher profile
Response Time 7h
Lessons offered by Sidney Smith
  • Individual
The lessons will be held
  • By webcam
Taught subjects
  • Electrical engineering
  • Electronics
  • Elementary School
  • Middle School
  • Sophomore
  • Junior
  • Senior
  • Advanced Technical Certificate
  • College
  • Adult Education
  • MBA

An Electrical and Electronics engineer with about 8 years of teaching experience


My teaching method is based on teaching by using examples. I make sure to still provide my students with clear learning goals, but they are able to make their own choices within that framework. I also encourage active learning for my students.


I am a graduate with a Bachelor’s Degree in Electrical and Electronic Engineering with a Cumulative GPA of 3.0 and over five years of Engineering work experience as a R&D Electronic Engineer at Nkelecom Consulting in Netherlands, R&D Electrical Engineer at ASML Netherlands, Electronic Engineer at Philips Innovation Services and Philips Lighting in Netherlands. I also have about seven years of sales experience as Director of Sales and Maintenance at Best Sales Electronics in Cameroon and about eight years for teaching experience as a High School science teacher at Standard Comprehensive Bilingual High School in Cameroon and an Academic tutor at Fontys University of Applied Sciences in the Netherlands.


Rate for online lessons : $20/h
Lessons offered by Sidney Smith
The lessons will be held
Taught subjects
  • Electrical engineering
  • Electronics
  • Elementary School
  • Middle School
  • Sophomore
  • Junior
  • Senior
  • Advanced Technical Certificate
  • College
  • Adult Education
  • MBA

Sidney Smith's resume

Sidney Smith Oteggewo Osojoh Ebot
1936 Forest Elm Court
Columbus, OH 43229
Phone: (concealed information) Email: (concealed information)
Skype (concealed information) Linkedin: (concealed information)

Demonstrate my work and education experiences in order to get an Electrical or Electronic Engineering job (systems design, integration, installation to testing) that enable me to use my acquired skills to be exceptionally productive.
An innovative, Problem solving and result-oriented Electrical and Electronics Engineer with over five years of Electrical and Electronic engineering experience. Excellent interpersonal and communication abilities and possess a wide range of technical skills. Enjoys being part of a team and thrives in high pressure and challenging working environments. Broad knowledge of Circuit Analysis, Design and Testing. Interested in an Electrical or Electronic Engineer position.

Fontys University of Applied Sciences, Eindhoven, Netherlands.
Major: Electrical and Electronic Engineering.
Degree Earned: Bachelor of Science in electrical and Electronic Engineering with CGPA of 3.0.

 Member of Institute of Electrical and Electronics Engineers (IEEE).
 Applications: NI LabView, NI Multisim, MATLAB and Simulink, ABEL Hardware Design Language, Microchip MPLAB, VHDL using Xilinx ISE, HDL Designer and ModelSim, LTSpice, ST Visual Develop, Cosmic C Compiler, Visual Studio, Atmel Studio, Eagle, Altium Designer.
 Programming Languages: C/C++, Java, C#, Basics of PLC Programming using Ladder Diagram.
 Operating Systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10.
 Microsoft Office Suite: Words, Visio, Power Point, Excel, Publisher and Access
 Circuit Design, Analysis and Testing, Instrumentation and Electrical Measurements, Organizational Skills, Interpersonal Communication, Problem Solving, Testing and Validation of Electrical Systems, Embedded Software Development, Prototyping.
Bilingual (French-Basic and English-Fluent)

1. State of Ohio, Department of Health March 2020 to Present
Job Title: Electronic Technician
Task: To Install, service, diagnose, calibrate, repair and perform preventative maintenance on Multi-Agency Radio Communication System [MARCS] mobile and two-way radio systems in support of the Bureau of Health Preparedness (BHP).
 Coordinates, conducts and tracks periodic tests on MARCS mobile equipment with external partners (e.g., local health department [LHD] staff, health care professionals, hospital administrators, internal ODH staff).
 Designs, writes, and updates MARCS, Ohio Public Health Communications System (OPHCS), Ohio Point of Dispensing (OPOD), Surgenet, Ohio Responds, OhioTRAIN and all technically operated systems.
 Works closely with LHDs to identify issues and concerns, in order to ensure integration of communication (mass notification via voice or email) systems as they relate to technical procedural use of equipment and continuity of program goals regarding OPOD, MARCS and OPHCS.
 Interacts closely with program managers to ensure coordination of information (e.g., continued updates) as needed for assigned projects as they relate to public health preparedness and communication infrastructure.

2. Varsity Tutors, U.S.A. November 2019 to Present
Job Title: Tutor
Task: To teach and help middle school to University students with their assignments and projects in Mathematics and Electrical Engineering.
 I actively taught students
 I created lesson plans
 I assigned and corrected homework

3. Nkelecom Consulting, Eindhoven, Netherlands March 2014 to March 2019
Job Title: R&D Electronic Engineer
Task: To find out solutions to problems presented by clients. Design, build and improve technical solution on manufacturing process to achieve efficient and sustainable performance for clients.
 I researched, designed and developed new electronics systems and additional modules to existing systems in compliance with customer specifications from concept development to production launch.
 I performed circuit simulations using LTSpice, Multisim, MATLAB and Simulink.
 I designed and modified electronic systems and modules using Eagle and Altium Designer for schematic capture and PCB layout.
 I developed prototypes and test circuit designs in an electronic lab environment.
 I carried out hardware performance evaluation tests and data analysis.
 I Investigated complaints from customers, evaluated problems, and recommended solutions
 I developed maintenance and testing procedures for electronic systems and modules
 I performed project planning and estimating tasks during product development.
 I performed testing of Electronic modules and Systems to conform functional specifications and requirements.
 I also developed Embedded Software systems using Microcontrollers such as Arduino Microcontrollers, PIC Microcontrollers, STMicroelectronics Microcontrollers, ATMEL Microcontrollers.
 I developed and maintained engineering documentation and test procedures.

4. ASML Netherlands B.V., Veldhoven, Netherlands November 2015 to May 2016
Job Title: R&D Electrical Engineer
Project Title: Model Driven Engineering with MATLAB. Case Study: Refactoring of MATES
Tasks: MATES, which stands for MATLAB Exporter to Software Development is a MATLAB tool that helps functional engineers to validate the possible problems while deploying MATLAB models developed in Windows operating system in the deployment platform that operates on Solaris or Linux.
 I redesigned the MATES tool using refactoring to introduce software principles, give proper naming of the MATLAB m-functions
 I introduced a proper-layered architecture in MATES.
 I designed a test to compare the output of the exiting MATES and the redesigned MATES
 I documented the MATES to provide a guide for easy maintenance
 I presented the outcome of the project to a team of engineers
 I used Microsoft Word, Visio, Excel and PowerPoint in this project.

5. Philips Innovation Services Eindhoven, Netherlands January 2015 to June 2015
Job Title: Electronic Engineer
Project Title: Power Over Ethernet using POECIE Board
Tasks: Philips has developed luminous carpets which consist of placing carpets over a Luminous Carpets (LC) LED tile made up of 16x16 matrix of Luxeon 3014 LEDs. The Poecie system is self-powered if connected to a PoE switch.

The Poecie system was developed by Philips Innovation Services for Digital Power Lighting projects with the ambitions in the field of Power over Ethernet and IP control for lighting. It functions as an injector. It gets data from the switch and injects the data and 0.5A at a voltage of 48V DC to a Power Device (PD).
 I investigated the possibility of using Power over Ethernet to power an existing Luminous Carpet LED (LC) tile and to establish a communication protocol between the Poecie board and the LC tile using serial peripheral interface (SPI) to control the LEDs on the tile.
 I designed and implemented a firmware for the communication protocol using the programming in C++ with an ATMEL microcontroller.
 I designed a DC-DC converter to stepdown the voltage to 3.3V DC to power the Microcontroller.
 I carried out testing of electronic systems using equipment like Oscilloscope, Digital Multimeter, and Logic Analyzer.

6. Fontys University of Applied Sciences, Netherlands September 2014 to January 2015
Job Title: Academic Tutor
Tasks: Assistant to the lecturer of Control Theory. Assisting second year engineering students to do their practical assignments in control Theory.
 I provided explanations and possible solutions where students found difficulties
 I explained to them how to solve problems and checked the completed work
 I helped students with MATLAB commands
 I revised the calculation of transfer functions of Electrical circuits and Mechanical Systems with the students
 I taught the students how to simulate transfer functions using MATLAB and Simulink
 I taught the students how to construct and visualize Root Locus and Bode plots on MATLAB
 I gave some feedback to the lecturer for improvement of some of the assignments
 I also made proposals for correction of some of the assignments where I found errors
 I also taught and provided the lecturer and students with codes on how to calculate the natural frequency, damping ratio and overshoot of second order transfer functions using MATLAB.
 I taught the students how to use MATLAB’s Sisotool and the effect of different controllers

7. Philips Lighting, Eindhoven, Netherlands September 2013 to January 2014
Job Title: Electronic Design Engineer
Project Title: Controlling Xitanium 75W Analogue LED driver digitally using DALI Protocol
Tasks: Xitanium 7W Analogue LED driver is a non-dimmable driver with fixed output current set by Rset, controlling it digitally with DALI will make it possible to vary the output current thus the brightness of the LEDs.
 I carried out testing to locate suitable point on the Schematic of the LED driver by testing, where a PWM signal can be injected
 I selected a suitable low-cost microcontroller, which I used to generate PWM signal using C language
 I designed and implemented the firmware for generating the PWM signal.
 I integrated the PWM Module into the DALI protocol for controlling the output of the LED driver.
 I carried out testing using equipment such as Oscilloscope, Digital Multimeter, Function Generator.
 I designed a DC-DC converter to stepdown the voltage to 3.3V DC to power the Microcontroller.
 I designed a Low pass filter and Voltage level shifter and integrated it into the existing LED driver.
 I assisted the Testing team to carry out some Hardware in Loop (HIL) testing on LED drivers using LabView.
 I documented and presented my investigation and the outcome of the project as a report.

8. Best Sales Electronics, Buea, Cameroon July 2004 to August 2011
Job Title: Director of Sales and Maintenance
Task: Managing the sales and technical teams of Best Sales Electronics. Best Sales Electronics is a shop that sells and repairs Electronics/Electrical equipment and appliances.
 I cut down the running cost by scheduling labor as required to ensure that all positions were staffed as needed and labor cost objectives were met.
 I developed and managed the marketing budget to achieve maximum sales and profit
 I oversaw all event bookings to ensure that the sales were filled with qualified leads and prospects.
 I hired, train, and evaluate all sales staff under the direction of upper management
 I assisted as needed to ensure guest service standards and efficient operations are effective
 I prepared all required paperwork in an organized and timely manner
 I analyzed sales data, compiled reports, and made suggestions based on analysis.
 I helped clients to interpret user manuals of equipment and appliances.
 I helped to educate the clients on how the electronics equipment and appliances are used
 I helped to troubleshoot problems encountered by clients with the appliances

9. Standard Comprehensive Bilingual High School, Cameroon September 1996 to June 2004
Job Title: High School Science Teacher
Task: To prepare secondary and high School students for their final examinations in Mathematics and Physics.
 I actively taught students
 I created lesson plans
 I assigned and corrected homework
 I managed students in the classroom
 I communicated with parents about the progress of the students

Provided upon Request

Similar teachers

electrical engineering lessons close by? Here's a selection of teacher ads that you can check out.
Superprof can also suggest electronics lessons to help you.

San Antonio
PhD in Electrical Engineering, 5 years of TA experience in EE/Physics and BME
1st lesson free!

Hands-on approach; I don’t believe simply reading a textbook and solving practice problems teaches the material....

Lessons by webcam In-person lessons Approved profile
North Bethesda
Electrical Engineering & Electronics & Math courses and will help you discover future opportunities
1st lesson free!

I let you learn the way you prefer. I help you feel that you want to know more about the topic of the class. By throwing...

Lessons by webcam In-person lessons Approved profile
Working electrical engineer specialized in analog, digital circuit and programming (c, python).
Wai Yuen
1st lesson free!

I like teaching new concepts starting from the fundamentals. I believe this helps the brain to make connections. I like...

Lessons by webcam In-person lessons Approved profile
10 years of experience in sharing knowledge about digital design engineering and vlsi design.
1st lesson free!

I approach each technical topic with simple example in our day today life which helps everyone to understand easily ...

Lessons by webcam In-person lessons Approved profile
Vitrolles, France
Robotics course by a student Ingénieure Bac + 5, Freelancer and Smartprof Robotique
  • (18 reviews)

I propose: Private courses in Robotics, electronics, electricity, maths or physics for children, adults, all ages and all...

Lessons by webcam In-person lessons Approved profile
Robotics Coach and Instructor offering robotics lesson using LEGO Mindstorms EV3 Software in Philippines with 2 years experience
Mike Kevin
1st lesson free!

My teaching method is hands on training to provide a quality of understanding on how to execute a successful program to...

Lessons by webcam In-person lessons Approved profile
Antony, France
Student in engineering school gives courses in Engineering Sciences, Physics, Chemistry and Thermodynamics
  • (18 reviews)
1st lesson free!

I like to share knowledge with other pupils / students, especially since I have been there before so I know how to make...

Lessons by webcam In-person lessons Approved profile
Engineering and Physics Graduate doing PhD in Applied Mathematics offers Engineering lessons. Zoom teaching available.
1st lesson free!

My teaching method is very concept- and example-based. The goal is to understand the core concepts and be able to build...

Lessons by webcam In-person lessons Approved profile
Oldham, United Kingdom
A highly qualified experienced and skilled tutor is available at your doorstep
  • (13 reviews)
1st lesson free!

My teaching method is learner oriented exercise based and tend to help learner in step wise solutions. I give lessons to...

Lessons by webcam Approved profile
London, United Kingdom
I will provide help related to your engineering projects . I can teach anything related to engineering (mechanical , electrical , computer )
  • (13 reviews)
1st lesson free!

I will teach according to best of my knowledge.surely as i have experience i will able to teach engineering in a best way.my...

Lessons by webcam Approved profile
Lancy, Switzerland
Mechanics and Electronics - the easiest way to learn is based on constructive and open discussions
  • (25 reviews)
1st lesson free!

As an experienced teacher, supportive mentor and knowledgeable career advisor, I help my students make informed decisions...

Lessons by webcam In-person lessons Approved profile Responds within an hour
Jardim das Industrias, Brazil
Engineer with extensive experience in electronic circuits, embedded systems, control and automation.
Marco Antonio
  • (19 reviews)
1st lesson free!

I am a Biomedical Engineer, currently studying for a Master Degree in Engineering from the Federal University of the State...

Lessons by webcam Approved profile
I have been in aerospace industry over 33 years. Down through many different projects, a group lead in CAD/CAM implementation for aircraft like F-35B, Boeing 747-8 cargo.
1st lesson free!

I used to be ITT Technical Institute instructor, Prefer hand drawing to illustrate academic materials, especially in...

Lessons by webcam In-person lessons Approved profile
Clayton, Australia
I teach Mathematics in a fun way with math puzzles and games for a child to build up strong basics.
  • (5 reviews)
1st lesson free!

I start my class with a short goal of student and initially teach him/her basics required. Secondly I will teach them...

Lessons by webcam In-person lessons Approved profile
Burnaby, Canada
Computer science PhD student at SFU teaching university courses for computer science and electrical engineering in Burnaby, Vancouver
  • (12 reviews)
1st lesson free!

My teaching method differs for one person to another; however, I try to convey the underlying concepts first and then try to...

Lessons by webcam Approved profile Responds within an hour
, Nigeria
Learn arduino programming to step up your electronics/automation work in the world
  • (20 reviews)
1st lesson free!

I am a specialist in arduino programming, i have been practicing with electronics for about seven(7) years. You need to get...

Lessons by webcam In-person lessons Approved profile
at his home at your home By webcam
1 hour Not available Not available $20
Request a lesson